Home /

Installation Instructions

Installation is simple, and doesn’t require a lot of equipment. The short version is this: Just spray or roll CreteDefender on clean concrete, and make sure it stays wet for 20 minutes to allow the solution to penetrate and react. Using a stiff broom or squeegee, move the product around on the surface to keep it from drying out or puddling.

No need to worry about excess solution, simply push it off into the grass or guide it toward the storm sewer. CreteDefender is totally harmless to plants and animals! It will etch glass and stain aluminum, so a bit of caution is needed around thresholds and vertical structures.

A detailed explanation of tools needed and application procedure can be found in our application pdf:

Left click to open in new window-
right click to download.